The defence against pigeons can be installed according to the local conditions, on the cornice of an iron board, of a window, wall, on the roof gutter, on the windowsill or dripstone.
Description: Different coverage from 30 to 230 m, with a height from 100 to 110 mm. The thorns consist of stainless arches, elastic upon inflection. The metallic stainless steel rods give them increased resistance. The transparent polycarbonate sticks have high UV resistance. Sticks are installed using a special glue, with a long life-duration (at least 5 years).
Seting up protection nets is called for in need of approach and landing prevention(for example, luminaries). The polyethylene networks stand out through a high attraction force. They reflect the sun beams and don’t allow humidity. The networks’ life duration can be longer than ten years.
Description: Irrespective of its size, a high quality net setup is always made according to the same principles. Quality is ensured by the long term protection power, resistance to weather conditions, UV resistance and discreet appearance. The extension cable strained through the cables stretcher will be additionally strengthened, through corners setting and cable leading on the buildings façade, to prevent pigeons from squeezing in. The rectangular network will finally be well fastened on the frames made up of the extension cable, through clips. Due to the setting of clips, the nets will be perfectly fastened vertically and horizontally.
The aluminum pipe used is 3 m long and 3.5 mm wide. The links between the pipes are made through clips made of special high quality steel. They allow an easy and simple installation in niches, corners or in different other particular architectural conditions. The current device for the protection against pigeons is adequate for installation inside and outside and ensures an installation with a size up to 5000 running meters. Electrical impulses are sent in the aluminum pipe at regular distances. If a pigeon gets in contact with the pipe at that moment, he receives a slight current impulse and leaves the place immediately.
Description: The system is made up of two parallel aluminum pipes, fastened through an UV resistant glue, which are isolated in the masonry. The fastening is done easily, by sticking, screwing or riveting. The pipes are connected to the electric device through clamps.
